4 Considerations When Remodeling An Older Bathroom

If you are in the process of getting ready to remodel an older bathroom that was built before the 1980s, you need to think beyond the visual upgrades that you want to make to the home and consider the behind-the-scenes structural updates you will need to make to the bathroom as well. 

The Plumbing Structure 

If the home was built in the 1980s, the plumbing may still be up to more recent code regulations. If the home was built before the 1980s, there is a good chance that the plumbing is no longer up to code. If you have galvanized lines in your bathroom, you are going to want to replace the galvanized lines with either PEX plumbing or copper plumbing. Both of these types of plumbing materials will meet modern standards and are long-lasting materials that you shouldn't have to change out for a long time.  

Doing this is going to require you to open up the walls in your bathroom and will more than likely require your contractor to get into your crawlspace or basement as well. That means you will need to install new walls in your bathroom.  

The Toilet 

Toilets have made a lot of advances over the last decade, so if your toilet is older than a decade, you need to change it out. Most old toilets use at least three to five gallons of water with each flush, whereas newer energy-efficient toilets use 1.5 gallons or less per flush. A new toilet can greatly reduce the amount of water that your household uses each day. If you apply for a permit for the remodeling project, which you should do, you will need to install a toilet that is up-to-code. 

The Electricity 

When you open up the walls to update the plumbing for the bathroom, you need to take a close look at the electrical setup. Make sure that the wiring is up to code. You may want or need to install more outlets, as many old-school bathrooms lacked outlets altogether or only had a single outlet. Be sure to add safety outlets that are designed for wet environments.  

The Vent 

Depending on the age of your bathroom, it may not have a vent. A vent is necessary for removing moisture from the bathroom and preventing mold from growing. You may need to upgrade the wiring and even install a new fan. 

When you get ready to remodel an older bathroom, remember that you need to budget and plan for bringing the bathroom up to code, which may require replacing the plumbing and electrical system, installing a new toilet, and putting in a new bathroom exhaust vent. For more information, contact a local bathroom remodeling company.


Share