Simple, Safe, Non-Toxic Maintenance Tips For Your New Vinyl Windows

As a homeowner, you most likely understand the importance of regular updates. Of course, certain updates or replacements not only improve the look of your home, but also ensure it remains valuable and functional. If window installation offers an estimated 72.9 percent return on your investment, it can be a worthwhile expense.

From added appeal and improved energy efficiency, the benefits of new windows for your home are easy to see. However, proper maintenance is essential to protect this new investment. Using this guide, you can clean and maintain your new vinyl windows.

No-VOC Glass Cleaner

Visit you local hardware or discount retailer and you will find a large selection of glass and window cleaners. While effective for removing tough dirt and debris from mirrors and windows, these cleaners contain VOCs, or Volatile Organic Compounds. VOCs are toxic for the environment, but they can also affect your skin, eyes, and respiratory system with prolonged exposure.

To clean your windows in a safer, non-toxic manner, add 1 gallon of water and 1 gallon of white vinegar to an outdoor sprayer. Shake the sprayer container to mix. Then, pump the handle of the sprayer to create pressure in the nozzle. Spray a thorough amount of the exterior of your new windows and allow to soak for a few seconds. Use a squeegee tool to remove the excess vinegar solution and leftover dirt or dust. After each swipe of the squeegee tool, use a clean cloth or paper towel to wipe off the rubber blade.

Cleaning your windows may leave a streaky finish behind on the glass. If this is an issue, use balled-up newspapers to wash the windows. Spray the solution onto the glass and allow to soak for a few minutes. Gather a few old newspapers into a ball and begin washing the windows in a circular motion. Move the newspaper ball across the entire glass pane, but avoid touching the vinyl frames. In many cases, the newspaper ink will stain lightly-colored vinyl frames.

Spot Remover

Hard water spots from the rain or other outdoor elements can develop on your window glass, decreasing the appeal of your new windows. While difficult, removing these spots is possible using the following recipe:

  • 1 cup of rubbing alcohol
  • 1 cup of white vinegar
  • 4 cups of warm water
  • 4 tablespoons of corn starch

Add to a spray bottle and shake to mix the ingredients. Spray the solution onto a clean microfiber cloth before washing spotty areas of your glass panes. The solution will not only remove the water spots, but also clean and shine your new windows without using harmful ingredients.

Eco-Friendly Frame Cleaner

Even with periodic cleaning of your window panes, your vinyl frames may discolor over time. This staining may be due to general weathering from the outdoor environment or the growth of mold and mildew. Thankfully, cleaning your vinyl frames is simple using non-toxic, eco-friendly ingredients.

In a bucket, combine 3 gallons of hot water and 2 cups of baking soda. Mix to dissolve the baking soda into the water. Soak a few microfiber cloths in the solution. Wring out the excess liquid before washing each of your vinyl window frames. Use a damp rag to wipe away leftover dirt and cleanser.

The baking soda effectively dissolves away dirt, debris, and any discoloration from your vinyl frames without harming surrounding landscaping.

Choosing to install new vinyl windows in your home is a worthwhile investment, but proper cleaning and maintenance is imperative. Using these simple solutions, your investment will be clean, functional, eco-friendly, and valuable.

For more tips or assistance, contact window installation services near you.


Share